Indian Railway main logo Welcome to Indian Railways RDSO Logo
   
View Content in Hindi
National Emblem of India

About Us

Directorates

Tenders

Vendor Interface

Specifications/Drawings

Contact Us



Bookmark Mail this page Print this page
QUICK LINKS
List of Specification

Section wise list of Specifications in M&C Directorate
 
A.Non-Destructive Testing (NDT) Section:
 
S.
No.
Name of Specification
Specification No.
1.
Specification for test Panels.
2.
Specification for Ultraviolet Lamp.
3.
Specification for Ultraviolet Intensity meter
4.
Specification for Magnetic Particle used in
Magnetic Particle Examination
5.
Technical specification for Lathe centre probe
for Ultrasonic Testing of B.G. axles using contact method
6.
Technical   specification   for    piezoelectric
probes for Ultrasonic testing of Railway components using contact method.
7.
Technical specification for magnetic crack detection for examination of crack in camshaft and connection rods of Diesel
Locomotives
8.
Specification for the equipment of Magnetic Particle Testing of Axle
9.
Specification for portable Digital Ultrasonic Flaw Detector with A-Scan storage.
10.
Technical Specification for Digital Ultrasonic Single Rail Tester with colored signals and real A-Scan pulse echo with continuous recording of B-Scan storage along with Data setups. Valid Upto: 30.12.2022
Technical specification of Digital Ultrasonic Single Rail Tester with 9 Probes, coloured signals and real A-Scan pulse echo with continuous recording of B-Scan storage of each probe alongwith data setups. w.e.f – 31.12.2022
 
11.
Specification of Digital Ultrasonic testing equipment for welded rail joint with LCD screen, trigonometrical function and A- scan storage along with data setup.
12.
Technical Specification for Digital Ultrasonic Double Rail Tester with minimum two base lines, colored signals and real A-Scan pulse echo with continuous recording of B-Scan storage along with Data setups. Valid Upto: 30.12.2022
RDSO/M&C/NDT/130/2007(B-Scan),Rev III,  July 2017
Technical specification of Digital Ultrasonic Double Rail Tester with 9 Probes on each rail and minimum two base lines coloured signals and real A-Scan pulse echo with continuous recording of B-Scan storage of each probe alongwith data setups. w.e.f – 31.12.2022
RDSO/M&C/NDT/130/2007 (B-Scan) Rev-IV, August 2021

B. Rubber & Plastic (R&P) section
 
S. No.
Name of Specification
Specification No.
1.
Moulded polyurethane rubber components (revision-2)
2.
Rubber Connecting Tube for Pneumatic Rail Treadle (Revision-1)
3.
Rubber Diaphragm used in Pressure switch for QPH Application in Electric Locos (Revision-1)
4.
Plunger of Piston Assembly of Bolster Friction Device for BG Flexi coil Mark-I Bogie (Revision-1)
5.
Rubber used as Lining of saddle of 24– Axle Special Wagon (Revision-1)
6.
Rubber Top of Carbon Brush and Rubber Sleeve of Pigtail of
Carbon Brush (Revision-1)
7.
Pedestal Liner used on Horn Guides of Bogie Frame of WDM-4 Locos (Revision-1)
8.
Rubber Gasket for Relays (Revision-1)
9.
Rubber Cushion for Storage Battery (Revision-1)
10.
Rubber Lining for 16 – Axle Special Wagons (Revision-1)
11.
Rubber Roller for Flexible Coupling of Diesel Locos (Revision-2)
12.
Fire resistant jute fabric (reaffirmed)
13.
Moulded Fluorocarbon Elastomeric Seals and Gaskets (Revision-1)
14.
20 mm thick Grooved Rubber Sole Plate for Ballast less Track
15.
Polymer trolley wheels
16.
Rubber Grommet Push Rod Sleeve of Diesel Locomotives
17.
Rubber Cable Connection Cover of Diesel Locomotives
18.
12 mm thick Grooved Rubber Sole Plate for use with RCC Block in Washable Apron
19.
5.0 mm thick Nylon Cord Reinforced Elastomeric Pad
20.
Cast Nylon-6 for use as gears, (Revision-1)
21.
Rubber Diaphragm for Acceleration Control Device for
Diesel Locomotives (Revision-1)
22.
Cast Nylon-6 for use as baffle plates for YDM4 Locos (Revision-1)
23.
Polyamide-6 (Nylon-6) components
24.
Ultra-high molecular weight – high density polyethylene (UHMW-HDPE) components, (Revision-1)
25.
Moulded polytetrafluoroethylene (PTFE)
components(revision-1)
26.
12 mm thick Base Rubber Pad for Mono Block Sleeper in
Ballast less Track Assembly
27.
12 mm thick Side & End Rubber Pads for Mono Block
Sleeper in Ballast less Track Assembly
28.
Plastic End Caps for Galvanized Steel Tubes Assemblies of Traction System
29.
Polyethylene Foam for Ballast less Track Assembly
(Revision 1)
30.
Rubber Expansion Joint for Concrete Bridge Deck
31.
Sealant, Rubberized Bitumen Emulsion for Ballast less Track Assembly
32.
6 mm thick Sole Plates made of Thermoplastic Elastomer for use between Rail and Concrete Sleeper
33.
Cable cleats (revision-1)
34.
Rubber Gaskets, Sheets and Mouldings for
Loco Components
35.
20 mm Thick Nylon cord Reinforced Elastomeric Pad
For Steel Channel Sleepers
36.
10 mm thick nylon cord reinforced elastomeric pad for Placing between channel sleeper and rail
37.
25 mm Thick Nylon cord Reinforced Elastomeric Pad for
Steel Channel Sleepers
38.
6 mm thick nylon cord reinforced grooved rubber sole plate for placing beneath rails at turnouts (provisional)-2007
 
C.Paint Testing & Corrosion Engineering Lab
 
S. No.
Specification No.
Name of the Specification
1
Specification for Epoxy cum Polyurethane Painting System (Two Pack) for The Exterior Painting of Railway Coaches, Diesel and Electric Locomotives and Other Industrial Applications
2
Specification for Liquid Cleaning Composition for Exterior of Railway Coaches.
3
Specification for Epoxy-Zinc Phosphate Primer, Two Pack
4
Specification for Epoxy-MIO, Two Pack
5
Specification for Epoxy Chemical Resistant Pack, Two Pack
6
Specification for Epoxy Coal Tar Paint, Two Pack
7
Specification for Rust Stabilizer.
8
Specification for Epoxy Stearate Water Sealing Compound, Two Pack
9
Specification for PU Coal Tar
10
Specification for Full Gloss Red-Oxide Polyurethane Enamel for Wagons, Bridges & Structures and other Industrial Applications (Two Pack)
11
Specification for PU Aluminum, Three Pack
12
Specification for High Build Epoxy, Two Pack
13
Specification for Epoxy Mastic Filler, Two Pack
14
Specification for Epoxy Surfacer, Two Pack
15
Specification for Tie-Coat for Inter-Mixing of Epoxy PU & Alkyd Paint System (Two Pack) 
16
Specification for High Performance Liquid Paint Stripper.
17
Specification for Cleaning of Copper Tubes & Fins of Condenser of AC Coaches.
18
Specification for Epoxy based Knifing Stopper Putty.
19
Specification for Cleaning Compound for Cleaning of Tank Wagon.
20
Specification for enamel interior (a)Under coating (b)Finishing with fire retardant properties
21
Specification for High Performance Anti- Corrosive Thermoplastic Co-Polymeric Coating Systems for Track, Bridge & Structure and Other Industrial Applications
22
Specification for R/M Paint Red oxide (ISC: 446), Brushing, Finishing, Glossy for General purposes.
23
Specification for High Performance Anticorrosion Epoxy coating (Two pack)
24
Specification for Liquid & Power composition for neutralization and safe disposal of pyrophoric substances of LPG & BTPN (Petrol) tank wagons.
25
Specification for zinc film galvanization to impart corrosion protection.
26
Specification for bipolar concrete penetrating corrosion inhibiting admixture to protect embedded steel reinforcement in concrete from corrosion.
27
Specification for anti-graffiti clear coat for the exterior painting of Railway coaches, Diesel and electric locomotives.
28
Specification for full Nanotech enabled pigmented base metal primer and clear anti-graffiti coating system for exterior painting of Railway SS-301LN & 409M coaches.
29
Specification for Full Gloss Polysiloxane based Painting System for The Bridges, Exterior of Railway Coaches, Diesel, Electric Locomotives and Other Industrial Applications
30
Specification for Supply of Bituminous Emulsion.
31
RDSO Specification for Painting of Helical Coil Springs of LHB Coaches and similar applications (Single pack).
 
D.Fuel & Lubricant Section & Tribology Section
 
 
S. No.
 
Specification No.
 
Title of the Specification
 
Revision
 
Reaffirm
 
1.
 
Pneumatic Tool Oils
2020
 
---
 
2
 
Machine Tool Way Oil
2020
 
---
 
E.Welding Research Section
 
S. No.
DESCRIPTION
SPECIFICATION NO.
1.
MMAW Electrodes and Welding Rods
2.
Filler Wire for MIG/MAG Welding
3.
Wire and Flux for Submerged Arc Welding
 
 



Source : WELCOME TO RDSO CMS Team Last Reviewed on: 02-02-2022  

  Admin Login | Site Map | Contact Us | Disclaimer | Terms & Conditions | Privacy Policy Valid CSS! Valid XHTML 1.0 Strict

© 2016  All Rights Reserved.

This is the Portal of Indian Railways, developed with an objective to enable a single window access to information and services being provided by the various Indian Railways entities. The content in this Portal is the result of a collaborative effort of various Indian Railways Entities and Departments Maintained by CRIS, Ministry of Railways, Government of India.